Three simple lighting setups for small product photography
For small product photography, the biggest improvement usually comes from controlling where the light comes from and where it goes. A window, one lamp and a sheet of white paper can create cleaner images than a corner lit by several competing lights. The aim is to show texture, colour and form while keeping shadows predictable.
These three simple lighting setups suit ceramic pieces, jewellery, packaged food, stationery and small handmade goods photographed with a compact camera or smartphone. None needs a full studio. You can build them at home, carry them between rooms or adapt them to a market stall. Begin with one object, make a test exposure and refine the arrangement before adding equipment.
Use a window and a reflector
Place the product on a simple surface near a window, with the glass to one side rather than directly behind it. Side lighting reveals the shape of a bottle, the edge of a package or the texture of a handmade object. Turn off room lights so daylight remains the only source, and move the product closer to or further from the window to change its brightness.
Use a white foam board on the opposite side as a reflector. It fills the dark side and softens the shadow without making the product look flat. If the shadow is too heavy, bring the reflector closer; if the opposite side looks too bright, move it away. A sheet of white paper works for small items, although foam board is easier to keep upright.
Check the reflection on glossy packaging or glaze before pressing the shutter. A small piece of tissue paper can soften a particularly sharp reflection, but moving the light may give a better result. Photographing during the gentler part of the day also helps if the window produces hard-edged shadows.
Bounce a single lamp for softer shadows
When daylight is unavailable, a single LED desk lamp can replace the window. Aim the lamp at a large white card or pale wall instead of directly at the product. The card becomes an indirect source, spreading the light and creating a shadow with a softer edge.
The distance still matters. Start with the lamp and product about half a metre apart, then take test images as you move them. A closer lamp creates stronger contrast and a more defined shadow. A greater distance produces gentler shading, provided the lamp has enough power to illuminate the subject evenly.
Keep the lamp clear of curtains, paper and other combustible materials. An LED lamp runs cooler than a halogen bulb, making it safer for a temporary setup made from cardboard or fabric. If you own no lamp, a bedside light can work, although its colour and brightness may be less consistent.
For pale products, place a neutral card behind them and away from the lamp to prevent the white surface from becoming a featureless silhouette. For darker objects, a pale background will usually show their outline more clearly. Turn off overhead lights so you can judge the lamp’s effect accurately.
Build a portable light tent
A light tent gives a small object soft light from several directions at once. Make one from a sturdy cardboard box by cutting away a large section from two facing sides. Cover the openings with white tissue paper, then add a layer of thin white fabric if extra diffusion is needed.
Place the camera through an opening at one end and the object inside on a plain background. A phone can photograph through the opening without a tripod, provided it can be held steady or supported. White paper on the base separates the product from the cardboard and prevents colour from the box affecting the image.
Light the tent from outside with a lamp or use daylight through one paper-covered side. Test with the lamp switched off first, because the paper may allow enough light for a small object. Move the product away from the tent walls if its shadow appears too dark.
This setup is especially useful for jewellery, tiny accessories and glossy objects that pick up harsh reflections. It travels well when collapsed, and it allows the background to stay clean without a separate roll of paper. Avoid taping anything directly onto a hot lamp and never leave the tent unattended around children.
Plan around Australian light and selling online
Australian sunlight can be fierce. In Sydney, a windowsill at midday may create hard shadows that change quickly as clouds pass, so check the highlight on a ceramic mug or shiny wrapper and adjust the reflector as needed. Melbourne’s changeable skies can turn the same window into a softbox without any extra equipment.
Pricing for Australian shoppers usually means showing Australian dollars, with 10% GST included on most consumer purchases. Small makers selling at weekend craft markets in Melbourne and Sydney often use phone photographs for social listings as well as printed catalogues, so consistent colour and clear edges matter even when the shoot happens at a stall.
If you order diffusion material or lighting accessories online, check Australian Customs requirements and any GST or duty due on the parcel rather than assuming an overseas checkout will be cheaper. For advice on photographing a difficult reflective object, you can contact the author.
Save your best setup for the final images, but use a phone or compact camera to check each stage. Look for clipped highlights, unwanted colour casts and shadows hiding important details. Keep the background separate from the product’s colour, and photograph beside the window rather than in direct sun.
Choose by shadow, control and portability
The quickest way to choose is to look at the shadow edge, the amount of control and what you need to carry. A narrow range of lighting qualities covers most products, from jewellery that benefits from soft light to packaging that needs a clean edge and a controlled reflection.
Window light is the simplest starting point, while a bounced lamp gives reliable results after sunset. A light tent takes slightly more preparation but offers the most even lighting and a clean background. Choose the arrangement that fits the object and the location rather than the one with the most equipment.
| Setup | Light quality | Shadow appearance | Extra equipment | Best suited to |
|---|---|---|---|---|
| Window and reflector | Natural and directional | Soft to firm, depending on distance | Foam board or white paper | Ceramics, food, stationery and general products |
| Bounced desk lamp | Soft and controllable | Gradual edges with careful placement | LED lamp, white card and pale wall | Evening shoots, darker products and small spaces |
| Cardboard light tent | Even and diffused | Very soft, often minimal | Box, white tissue paper and fabric | Jewellery, tiny objects and reflective surfaces |